天基强银河背景下的空间碎片探测试验及分析

本文设计并完成了银河背景下碎片探测试验，数据分析表明，强的银河背景会降低探测器对暗弱碎片的探测能力，但对碎片的天文定位精度影响不大。本文验证了采用基于探测概率的极限探测星等方法表征探测器极限探测能力的合理性，以及基于仿真的方法增加数据完备度的可行性。本文的工作将为后续天基探测器的设计及探测试验的开展提供依据。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

基于不确定性的飞行器分离可靠性建模与分析方法

为实现飞行器分离任务可靠性的定量分析和高效精确评估，研究了高超声速飞行器分离任务过程中各种不确定性因素对分离可靠性的影响，提出一种基于不确定性的飞行器分离可靠性建模与分析方法。面向高超声速飞行器分离任务需求，建立分离动力学仿真模型，综合考虑分离过程不确定性因素的影响，利用灵敏度分析方法识别主要不确定性因素，构建分离可靠性模型。针对此模型，提出一种改进主动学习Kriging(IAK)的分离可靠性分析方法，通过新的采样策略选取失效概率更大的采样点作为新增训练点，进行高效可靠性分析。实例结果表明，该方法能够准确描述不确定性因素对分离过程的影响，提升分离可靠性定量分析的精度和效率，为飞行器分离方案的精细化设计提供支撑。     

微阴极真空电弧点火起弧及加速机理研究综述

微阴极真空电弧推力器具有结构简单、重量轻、功耗低、比冲高等优点，因而在航天推进领域有着广阔应用前景.当前推力器设计研制、可靠性和寿命的提高等方面遇到的一些关键问题均与微阴极真空电弧放电过程的基本物理问题密切相关.对微阴极电弧推力器运行中涉及的电子发射、电极间起弧过程、阴极斑点形成及特点、烧蚀和形貌变化、电极间等离子体射流加速过程进行了梳理，相关认识可以为今后进一步开展微阴极电弧推力器的设计优化、性能提高奠定基础.     

Д-30发动机ЭИ868合金扇形块的钎焊修复

针对某Д-30发动机大修对ЭИ868合金(对应于我国的牌号GH3044)扇形块的修复要求,采用真空钎焊的方法对扇形块进行了钎焊补焊。对钎焊补焊的扇形块进行超声波探伤。结果表明,钎缝内部质量满足HB7575-97一级钎焊接头的要求,表明所确定的修复工艺可实现ЭИ868合金扇形块的可靠修复。     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

可重复使用热防护材料应用与研究进展

可重复使用热防护系统是为高速重复使用飞行器而发展的关键性技术,涵盖了地球大气环境及非地球大气环境下的弹道式再入、高马赫数巡航等应用场景。根据现有高马赫数飞行器热防护现状,对高马赫数飞行器的主要热防护系统类型、特点和使用场景进行了简要介绍。在此基础上,结合国外里程碑式可重复使用飞行器（X-15、SR-71、航天飞机、X-33、X-37B、Spaceliner等）,梳理了可重复使用热防护材料的应用与研究进展,论述了代表性可重复使用热防护材料的发展、性能、研制进度、特点及应用前景。对国外在可重复使用热防护材料研制中的设计及发展思路,以及所存在的主要问题进行了总结归纳,为可重复使用热防护材料未来的发展提供了思路。     

2. 5D 衍生结构SiO2 f / SiO2 复合材料的经向力学性能

以几种不同的2.5D衍生结构织物为增强体,制备了法向增强、经向增强及经法向增强2.5D Si O2f/Si O2复合材料,比较了上述材料与现有2.5D Si O2f/Si O2复合材料的经向力学性能,并研究了经法向增强2.5D结构复合材料中增强纱比例、纤维体积分数与材料性能之间的关系,对织物结构进行了优化。结果表明,经法向增强2.5D Si O2f/Si O2复合材料的经向力学性能较现有2.5D复合材料有显著提高,该材料在较低密度下(1.6 g/cm3),经向拉伸强度与现有材料(1.65 g/cm3)持平,且经向压缩强度接近现有材料的4.3倍。     

摩擦焊设备振动油缸的性能分析

液压式摩擦焊设备是将电液伺服控制技术运用到摩擦焊接领域的一种先进设备。通过分析系统振动油缸的频率,找出影响频率的关键因素,深入分析这些因素对振动油缸伺服控制系统的影响,并利用AMESim仿真软件对该系统进行建模分析,验证了分析结果,并总结出改进系统的几点措施,为摩擦焊设备的设计改进提供了理论依据。。     

太阳能飞机翼肋结构拓扑优化设计

太阳能飞机翼肋结构轻薄且数量众多,其结构形式的合理性对于结构减重、机翼刚度设计等具有重要意义。基于现有太阳能飞机翼肋的结构形式,提出一种翼肋拓扑优化设计方法:首先,应用双向渐进结构优化法(BESO),以单元应力为判断指标,对太阳能飞机典型翼肋进行结构拓扑优化;其次,基于拓扑优化结果对翼肋进行结构细节设计;最后,通过有限元计算,验证翼肋的结构强度、刚度和静稳定性。通过本文方法,能够得到太阳能飞机翼肋更为合理的结构布局。